Deactivation

If you need to deactivate a start-shift/end-shift communication method, expand the Transmission instruction you want to deactivate. In the example below, we show deactivating the network start-shift/end-shift method. The process is the same for USB and FTP communications methods.

1. Expand Transmission: ToNetworkEndShift.

   

   1. Select ExportToNetwork

   2. Remove the checkmark from the Active box to mark this transmission method as inactive.

2. Expand Transmission: FromNetworkEndShift.

   

   1. Select ImportFromNetwork

   2. Remove the checkmark from the Active box to mark this transmission method as inactive.

3. Expand Transmission: ToNetworkStartShift.

   

   1. Select ExportToNetwork

   2. Remove the checkmark from the Active box to mark this transmission method as inactive.

Expand Transmission: FromNetworkStartShift.

1. Select ImportFromNetwork

2. Remove the checkmark from the Active box to mark this transmission method as inactive.