Content Comparison

...

1. If you need to deactivate a start-shift/end-shift communication method, expand the Transmission instruction you want to deactivate. In the example below, we show deactivating the network start-shift/end-shift method. The process is the same for USB and FTP communications methods.

   1. Expand Transmission: ToNetworkEndShift.

      

      1. Select ExportToNetwork

      2. Remove the checkmark from the Active box to mark this transmission method as inactive.

   2. Expand Transmission: FromNetworkEndShift.

      Image RemovedImage Added

      1. Select ImportFromNetwork

      2. Remove the checkmark from the Active box to mark this transmission method as inactive.

   3. Expand Transmission: ToNetworkStartShift.

      Image RemovedImage Added

      1. Select ExportToNetwork

      2. Remove the checkmark from the Active box to mark this transmission method as inactive.

   4. Expand Transmission: FromNetworkStartShift.

   Image Removed
   1. Image Added

      1. Select ImportFromNetwork

      2. Remove the checkmark from the Active box to mark this transmission method as inactive.